Desain Prototype Alat Kontrol Serta Deteksi Suhu dan Kelembaban Kandang Ayam Broiler Dengan Metode Fuzzy Berbasis IoT
DOI:
https://doi.org/10.25273/electra.v3i01.13976Keywords:
Fuzzy, Humidity, IoT, Temperature controlAbstract
In this study, the authors designed the control of temperature and humidity detection in chicken coops using the IoT-based Fuzzy method. Control prototype design and detection of temperature and humidity of broiler cages using IoT-based fuzzy methods, and can be monitored remotely with a smartphone using several components, namely NodeMCU ESP32 as a data processor and controller between the Dht-11 temperature sensor and the output in the form of an LCD to determine the temperature of the cage. directly and also in the form of Smartphone communication data via the internet network with Blynk software. the DHT-11 sensor is in charge of reading the temperature and humidity of the chicken coop, the LCD serves to provide a direct display of the results of the temperature and humidity monitoring data parameters, the blynk application itself is tasked with displaying sensor parameters remotely on a smartphone which in the blynk software can monitor or get notification if the temperature state is crossing a predefined threshold. All components require 24V voltage generated by the 220V SMPS power supply to 24V DC.  The use of fuzzy rules in temperature and humidity control can regulate the output performance of lights and fans that work according to the specified rules.
Downloads
References
R. S. Nugraha, S. Subiyantoro, and S. Nurcahyo, “Sistem Kontrol Suhu dan Kelembaban pada Inkubator Anakan Burung Paruh Bengkok Menggunakan Metode Fuzzy Logic,†J. Elektron. dan Otomasi Ind., vol. 5, no. 3, p. 26, 2021, doi: 10.33795/elkolind.v5i3.143.
S. K. Risandriya, “Pemantauan dan Pengendalian Kelembapan, Suhu, dan Intensitas Cahaya Tanaman Tomat dengan Logika Fuzzy Berbasis IoT,†J. Appl. Electr. Eng., vol. 3, no. 1, pp. 9–14, 2019, doi: 10.30871/jaee.v3i1.1394.
E. Prayitno, N. Juliasari, and P. F. Ariyani, “Monitoring Dan Pengontrolan Suhu Serta Kelembaban Penyimpanan Bahan Makanan Berbasis Web Dengan Metode,†Proceeding Sintak 2019, pp. 236–241, 2019.
R. Hidayat and P. W. Rusimamto, “Sistem Pengendalian Temperatur pada Inkubator Penetas Telur Otomatis berbasis Fuzzy Logic Control,†J. Tek. Elektro, vol. 08, pp. 199–207, 2019.
A. P. Sasmito, R. Primaswaran, and F. T. Industri, “Penerapan Logika Fuzy Pada Sistem Monitoring Dan Kontrol Kandang Ayam Otomatis Berbasis IoT Sensor Ultrasonik HC- SR04,†vol. 5, no. 1, pp. 315–320, 2021.
M Denny Ervianto, Zainal Abidin, Affan Bachri.2020. Rancang Bangun Nurse Call (Pemanggil Perawat) Berbasis Internet Of Things (Iot). SinarFe-7. Fortei7 Jawa Timur
Aditya Suranata, “Pengenalan Mikrokontroler, Development Board, Nod eMCU,ESP8266,†Aditya Suranata, 2019. https :// tutorkeren.com /artikel / pengenalan-mikrokontroler-development- board- nodemcu-esp8266.htm (accessed Jan. 19, 2022).
A. Faudin, “Apa itu Module NodeMCU ESP8266,†Agus Faudin, 2017. https://www.nyebarilmu.com/apa-itu-module-nodemcu-esp8266/ (accessed Jan. 19, 2022).
E. Anugrah, “Menampilkan Text di LCD 16x2 dengan Arduino,†Egi Anugrah, 2016. https://codepolitan.com/blog/menampilkan-text-di-lcd- dengan-arduino (accessed Jan. 19, 2022).
PAUZAN, “Interface Arduino dengan I2C LCD,†PAUZAN, 2021. http://pauzan.com/interface-arduino-dengan-i2c-lcd/ (accessed Jan. 19, 2022).
BarleyBobs28, “Setup Blynk,†BarleyBobs28, 2017. https://www.instructables.com/Setup-Blynk/ (accessed Jan. 19, 2022).
Unknown, “Penjelasan Lampu Pijar, Prinsip Kerja & Macam-Macamnya,†Unknown, 2016. http://kelaselektro.blogspot.com/2016/11/penjelasan- lampu-pijar-prinsip-kerja.html (accessed Jan. 19, 2022).
A. ALGIFARI, “kipashigh fan DC,†AFIF ALGIFARI, 2018. http://etheses.uin-malang.ac.id/12538/1/12650060.pdf (accessed Jan. 19, 2022).
Downloads
Published
Issue
Section
License
With the receipt of the article by ELECTRA Editorial Board and the decision to be published, the copyright regarding the article will be transferred to ELECTRA Journal.
ELECTRAÂ has the right to multiply and distribute the article and every author is not allowed to publish the same article that was published in this journal.
Ciptaan disebarluaskan di bawah Lisensi Creative Commons Atribusi-NonKomersial-BerbagiSerupa 4.0 Internasional.
Under the following terms:
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
NonCommercial — You may not use the material for commercial purposes.
ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
Â
