PENDEKATAN DESIGN FOR MANUFACTURE AND ASSEMBLY (DFMA) DAN HOUSE OF QUALITY (HoQ) UNTUK MERANCANG PALU MULTIFUNGSI

Authors

DOI:

https://doi.org/10.25273/kaizen.v7i1.20777

Keywords:

Perancangan alat, Palu, Kunci Sok, DFMA, HOQ

Abstract

The manufacturing industry has developed a lot both in the manufacturing and service industries. A very rapid and very dynamic development especially in the type of industry of irritating equipment and armoury. The development of tools began in 1775 by John Wilkinso who made the horizontal drill for the inner cylinder surface work. Nowadays a lot of new model tools are emerging that are required by distractions and disruptions. Examples are hammer and socket keys that are growing so rapidly and the industry is starting to keep competing to give innovation and advantages to its products so that it produces comfortable products and competitive prices. The aim of this study is to design a multifunctional hammer using the Design for Manufacturing and Assembly (DFMA) approach by looking at the conformity of product quality criteria based on the House of Quality (HoQ) as well as evaluating the prototype according to consumer criteria.

 

Keywords: Tool design, hammer, socket wrenche, DFMA, and HOQ

 

ABSTRAK

 

Sektor industri manufaktur pada saat ini sudah mengalami kemajuan yang sangat signifikan baik di sektor industri manufaktur maupun jasa. Kemajuan yang sangat cepat dan sangat dinamis terutama pada jenis industri berupa peralatan perbengkelan dan pertukangan. Mulainya perkembangan perkakas diawali tahun 1775 oleh John Wilkinso yang membuat bor horizontal untuk pengerjaan permukaan silinder dalam. Saat ini banyak bermunculan perkakas model baru yang dibutuhkan oleh perbengkelan dan pertukangan. Sebagai contoh adalah palu dan kunci sok yang berkembang begitu pesatnya dan industri mulai terus bersaing memberikan inovasi dan keunggulan produknya sehingga menghasilkan produk yang nyaman dan harga yang bersaing. Tujuan dari penelitian ini adalah untuk merancang palu multifungsi dengan menggunakan pendekatan Design for Manufacturing and Assembly (DFMA) dengan melihat kesesuaian kriteria kualitas produk berdasarkan House of Quality (HoQ) serta mengevaluasi prototype sesuai dengan kriteria konsumen.

 

Kata kunci: Perancangan alat, Palu, Kunci sok, DFMA, dan HoQ

Downloads

Download data is not yet available.

Author Biographies

Rizqi Wahyudi, Institut Teknologi Sumatera

Rizqi Wahyudi is a lecturer at Department of Industrial Engineering, Faculty of Technology Production and Industrial, Institut Teknologi Sumatera, South Lampung, Indonesia. Research Interests : Manufacture System, Product Development, Agroindustri and Safety

Andre Aqshal Hermawan, Institut Teknologi Sumatera

Andre aqshal hermawan is a student at Department of Industrial Engineering, Faculty of Technology Production and Industrial, Institut Teknologi Sumatera, South Lampung, Indonesia.

Andhyka Tyaz Nugraha, Institut Teknologi Sumatera

Andhyka Tyaz Nugraha is a lecturer and researcher at Department of Industrial Engineering, Faculty of Technology Production and Industrial, Institut Teknologi Sumatera, South Lampung, Indonesia. Research Interests: Agribusiness, Technology Management, Strategic Management, Supply Chain Management, Energy-Economics, Environment-Economics, Applied Econometrics, Sustainable Development, Green Human Resources Management, Structural Equation Modelling, and Macroeconomics.

References

H. S. Rahman, I. F. Rahmad, and A. Soleh, “Perancangan Mesin CNC (Computer Numericaly Control) Mini Plotter Berbasis Arduino,†It (Informatic Tech. J., vol. 5, no. 2, pp. 152–161, 2017, doi: 10.22303/it.5.2.2017.152-161.

N. Indrawan, “Rancang Bangun Meja Multifungsi dengan Menggunakan Metode Rasional,†2015, [Online]. Available: http://eprints.dinus.ac.id/id/eprint/17535

P. E. D. K. Wati and Y. M. Miraningsih, “Perancangan Ulang Alat Guna Mengoptimalkan Kinerja Alat Pemintal Pada Proses Pemotongan Bahan Baku Tas Anyaman (Studi Kasus UKM ABC),†KAIZEN Manag. Syst. Ind. Eng., vol. 06, no. 02, pp. 1–10, 2023, doi: 10.25273/kaizen.v6i2.16832.

E. Petrik, “Rancang Bangun Alat Bantu Pelepas Bearing Semi Otomatis (Proses Pembuatan dan Biaya Produksi),†2014. [Online]. Available: http://dx.doi.org/10.1016/j.biochi.2015.03.025%0A

F. Margaretha and A. R. Ramadhan, “Faktor-Faktor Yang Mempengaruhi Struktur Modal Pada Perusahaan Manufaktur Di Bursa Efek Indonesia,†J. Bisnis dan Akunt., vol. 12, no. 2, pp. 119–130, 2010, doi: 10.37598/jam.v3i2.285.

M. N. Saputra, “Rancang Bangun Alat Bantu Pelepas Bearing Semi Otomatis (Pengujian Alat),†Lap. Akhir, 2014, [Online]. Available: http://eprints.polsri.ac.id/336/

M. Basuki, S. Aprilyanti, Azhari, and Erwin, “Perancangan Ulang Alat Perontok Biji Jagung dengan Metode Quality Function Deployment,†J. INTECH Tek. Ind. Univ. Serang Raya, vol. 6, no. 1, pp. 23–30, 2020, doi: 10.30656/intech.v6i1.2196.

Y. K. Hasibuan, A. J. M. Rambe, and R. Ginting, “Rancangan Perbaikan Stopcontact Melalui Pendekatan Metode DFMA (Design for Manufacturing and Assembly) Pada Pt. XYZ,†e-Jurnal Tek. Ind. FT USU, vol. 1, no. 2, pp. 34–39, 2013.

R. Wahyudi, W. Supartono, and N. Khuriyati, “Analisis Mutu Produk dan Kemasan Lempuk Durian (Durio Zibethinus sp),†Ind. J. Teknol. dan Manaj. Agroindustri, vol. 2, no. 1, pp. 1–8, 2013, [Online]. Available: https://industria.ub.ac.id/index.php/industri/issue/view/14

A. Bijaksana, “Perancangan Mesin Press Emboss Alumunium di UMKM Denaya Handycrafts,†Tugas Akhir Fak. Teknol. Ind. UAJY, 2017, [Online]. Available: http://e-journal.uajy.ac.id/id/eprint/13473

I. Malik et al., “Penerapan Metode DFMA Dirancang Bangun Rangka Purwarupa Mesin Potong Plasma,†Semin. Nas. Rekayasa Teknol. Manufaktur, vol. 01, pp. 1–6, 2021, [Online]. Available: http://snrtm.polinema.ac.id

O. R. Yustian, “Analisis Pengembangan Produk Berbasis Quality Function Deployment (QFD) (Studi Kasus Pada Produk Susu PT MSA),†J. Ekon. dan Bisnis, vol. XVIII, no. 3, pp. 23–42, 2015.

A. Siswanto, “Pengembangan Desain Sistem Monitoring Dan Pengendalian Multi Proyek Konstruksi Menggunakan Metode House Of Quality Studi Kasus Dinas Pekerjaan Umum Kab. Gresik,†2017, [Online]. Available: http://repository.its.ac.id/46603/

H. Purnomo, “Pengukuran Antropometri Tangan Usia 18 Sampai 22 Tahun Kabupaten Sleman Yogyakarta,†Semin. Nas. IENACO – 2014, pp. 106–112, 2014.

H. Wahyuningrum and O. Desrianti, “Kajian evaluasi tingkat kesiapterapan teknologi (TKT) penelitian di Batan,†Semin. Nas. SDM Iptek Nukl. 2018, no. 42, pp. 97–104, 2018, [Online]. Available: http://repo-nkm.batan.go.id/5575/

Downloads

Published

31-05-2024

Issue

Vol. 7 No. 1 (2024): In Progress

Section

Articles

License

With the receipt of the article by KAIZEN Editorial Board and the decision to be published, the copyright regarding the article will be transferred to KAIZEN Journal.

KAIZEN has the right to multiply and distribute the article and every author is not allowed to publish the same article that was published in this journal.

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Under the following terms:

Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.

NonCommercial — You may not use the material for commercial purposes.

ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.