MODEL SUPPLY CHAIN OPERATION REFERENCE SEBAGAI PENINGKATAN KINERJA INDUSTRI TAHU KUNING DI KEDIRI

Authors

  • Lolyka Dewi Indrasari Universitas Kadiri
  • Afiff Yudha Tripariyanto Universitas Kadiri
  • Ana Komari Universitas Kadiri
  • Andrean Pradana Hidayat Universitas Kadiri
  • Emilia Swardana Universitas Kadiri

DOI:

https://doi.org/10.25273/kaizen.v6i2.15774

Abstract

The purpose of this study is to assess the comparative performance of the yellow tofu industry supply chain from MJS, WK and PM Kediri to improve the role of the Supply Chain Operation Reference model. The stage of this study is to assess the instrument of the Supply Chain Operation Reference with the weighting that has been planned percentage value. The findings achieved are the Supply Chain Response Time instrument with an estimated time of 7 days each; 5 days; and 6 days with actual achievements with a time of 9 days each; 8 days; and 9 days. The best Leadtime Order Fulfillment Instrument is MJS with Best in Class criteria with an achievement of < 4 days; Weka with the achievement of 5 days; and PM with 4 days of achievement. The contribution achieved is to achieve Advantage and Best in Class from the method used.

 

Keywords: Performa, Supply Chain Operation Reference, Tahu Kuning

 

ABSTRAK

 

Tujuan penelitian ini adalah menilai performa perbandingan rantai pasokan industry tahu kuning dari MJS, WK dan PM Kediri untuk meningkatkan peran model Supply Chain Operation Reference. Tahapan penelitian ini adalah menilai instrumen dari Supply Chain Operation Reference dengan pembobotan yang telah direncakan nilai prosentase. Temuan yang dicapai yaitu instrumen Supply Chain Response Time dengan estimasi waktu masing – masing target sebesar 7 hari; 5 hari; dan 6 hari dengan aktual pencapaian dengan waktu masing – masing 9 hari; 8 hari; dan 9 hari. Instrumen Order Fulfillment Leadtime terbaik adalah MJS dengan kriteria Best in Class dengan pencapaian < 4 hari; Weka dengan pencapaian 5 hari; dan PM dengan pencapaian 4 hari. Kontribusi yang dicapai adalah mencapai Advantage dan Best in Class dari metode yang dipakai.

 

Keywords: Performa, Supply Chain Operation Reference, Tahu Kuning

 

Downloads

Download data is not yet available.

Author Biographies

Lolyka Dewi Indrasari, Universitas Kadiri

Teknik Industri, Fakultas Teknik, Universitas Kadiri

Afiff Yudha Tripariyanto, Universitas Kadiri

Teknik Industri, Fakultas Teknik, Universitas Kadiri

Ana Komari, Universitas Kadiri

Teknik Industri, Fakultas Teknik, Universitas Kadiri

References

I. Rizkya, K. Syahputri, R. M. Sari, I. Siregar, and J. Utaminingrum, “SCOR: Business Process Analysis and Supply Chain Performance in Building Materials Industry,†IOP Conf. Ser. Mater. Sci. Eng., vol. 598, no. 1, 2019, doi: 10.1088/1757-899X/598/1/012070.

M. Tseng, “Improving the benefits and costs on sustainable supply chain finance under uncertainty,†Int. J. Prod. Econ., vol. 218, pp. 308–321, 2019, doi: 10.1016/j.ijpe.2019.06.017.

S. Bhuniya, “A supply chain model with service level constraints and strategies under uncertainty,†Alexandria Eng. J., vol. 60, no. 6, pp. 6035–6052, 2021, doi: 10.1016/j.aej.2021.03.039.

M. Abdirad and K. Krishnan, “Examining the impact of E-supply chain on service quality and customer satisfaction: a case study,†Int. J. Qual. Serv. Sci., no. December, pp. 1–26, 2022, doi: 10.1108/IJQSS-08-2020-0131.

P. A. W. Putro, E. K. Purwaningsih, D. I. Sensuse, R. R. Suryono, and Kautsarina, “Model and implementation of rice supply chain management: A literature review,†Procedia Comput. Sci., vol. 197, no. 2021, pp. 453–460, 2021, doi: 10.1016/j.procs.2021.12.161.

D. Mourtzis, J. Angelopoulos, and N. Panopoulos, “A survey of digital B2B platforms and marketplaces for purchasing industrial product service systems: A conceptual framework,†Procedia CIRP, vol. 97, pp. 331–336, 2021, doi: 10.1016/j.procir.2020.05.246.

M. Rozudin and N. A. Mahbubah, “Implementasi Metode House Of Risk Pada Pengelolaan Risiko Rantai Pasokan Hijau Produk Bogie S2HD9C (Studi Kasus: PT Barata Indonesia),†JISI J. Integr. Sist. Ind., vol. 8, no. 1, pp. 1–11, 2021, [Online]. Available: https://jurnal.umj.ac.id/index.php/jisi/article/view/6950

R. Giusti, D. Manerba, G. Bruno, and R. Tadei, “Synchromodal logistics: An overview of critical success factors, enabling technologies, and open research issues,†Transp. Res. Part E Logist. Transp. Rev., vol. 129, no. August, pp. 92–110, 2019, doi: 10.1016/j.tre.2019.07.009.

S. Agarwal, R. Kant, and R. Shankar, “Exploring sustainability balanced scorecard for performance evaluation of humanitarian organizations,†Clean. Logist. Supply Chain, vol. 3, no. September 2021, p. 100026, 2022, doi: 10.1016/j.clscn.2021.100026.

I. B. Suryaningrat, E. Rezky, and E. N. A, “PENERAPAN METODE GREEN SUPPLY CHAIN OPERATION REFERENCE (GSCOR) PADA PENGOLAHAN RIBBED SMOKE SHEET (RSS) (Studi Kasus Di PTPN XII Sumber Tengah Silo, Jember),†Agrointek, vol. 15, no. 1, pp. 1–17, 2021.

A. Chopra, D. Golwala, and A. R. Chopra, “SCOR (SUPPLY CHAIN OPERATIONS REFERENCE) MODEL IN TEXTILE I NDUSTRY,†J. Southwest Jiaotong Univ., vol. 57, no. 1, pp. 1–11, 2022.

D. Anggrahini, P. D. Karningsih, and M. Sulistiyono, “Managing Quality Risk in a Frozen Shrimp Supply Chain: A Case Study,†Procedia Manuf., vol. 4, no. Iess, pp. 252–260, 2015, doi: 10.1016/j.promfg.2015.11.039.

L. D. Indrasari, A. Komari, A. Y. Tripariyanto, K. T. Sanjaya, and S. Lutfianto, “Metodologi DMAIC untuk Meminimumkan Penolakan Produk Tahu Kuning oleh Agen Distributor,†J. Res. Technol., vol. 7, no. 2, pp. 123–137, 2021.

L. D. Indrasari and A. Komari, “Value Chain Analysis and Supply Chain of Layang Fishing Prigi Fish Auction Trenggalek Regency, East Java Indonesia,†J. Res. Technol., vol. VII, no. 2460, pp. 17–26, 2021.

L. D. Indrasari and A. Komari, “Usulan Kinerja Green Logistic dengan Pendekatan Root Cause Analysis guna Meningkatkan Re- Order Point yang Efektif terintegrasi dengan FMEA dan Fishbone Diagram ( Waisul et al ., 2017 ). ( Prokop , 2011 ). Pertumbuhan ekonomi mengakibatkan perusahaan manu,†Semin. Nas. 2021 Univ. Ma Chung, pp. 44–58, 2021.

L. D. Indrasari, E. Nursanti, and P. Vitasari, “Model Strategi Green Logistic (Penyimpanan) Pada Perusahaan Modal Asing PT. XYZ,†UPS TEGAL, vol. 9, no. 2, pp. 39–44, 2014.

H. Winarno and R. Haryadi, “Pengukuran Kinerja Manajemen Rantai Pasokan Dengan Pendekatan Supply Chain Operations Reference (SCOR) Model 9.0 Di PT Asahimas Chemical,†Semin. Nas. Teknol. Ind. Berkelanjutan II (SENASTITAN II), pp. 278–287, 2022.

H. Sarjono, K. Christofer, G. F. Nayoan, and M. D. Nugraha, “Performance Analysis in Palm Oil Industry Using Supply Chain Operations Reference ( SCOR ) Model,†Binus Bus. Rev., vol. 13, no. July, pp. 213–222, 2022, doi: 10.21512/bbr.v13i2.8027.

R. Yanti and M. F. N. Maghfiroh, “Supply chain performance measurement on small medium enterprise garment industry : application of supply chain operation reference,†J. Sist. dan Manaj. Ind., vol. 6, no. 1, pp. 14–22, 2022.

J. Z. Mutaqin, “PENGUKURAN KINERJA SUPPLY CHAIN DENGAN PENDEKATAN METODE SCOR ( SUPPLY CHAIN OPERATIONS REFERENCE ) STUDI KASUS DI PT XYZ,†J. Logistik Indones., vol. 5, no. April, pp. 13–23, 2021.

A. N. Rahman and L. Chairani, “ANALISIS PENILAIAN KINERJA SUPPLY CHAIN MENGGUNAKAN METODE SCOR SUPPLY CHAIN OPERATIONS REFERENCE) DI PT NFC,†J. REKAYASA dan OPTIMASI Sist. Ind., vol. 02, no. 1, pp. 27–32, 2019.

R. Acero, M. Torralba, R. Pérez-Moya, and J. A. Pozo, “Order processing improvement in military logistics by Value Stream Analysis lean methodology,†Procedia Manuf., vol. 41, pp. 74–81, 2019, doi: 10.1016/j.promfg.2019.07.031.

W. Sartika and E. Rahmi, “Cost of goods sold analysis of banana blossom chicken nuggets in the women farmers group ‘kWT Kebersamaan’ in Padang Pariaman Regency,†IOP Conf. Ser. Earth Environ. Sci., vol. 287, no. 1, pp. 1–5, 2019, doi: 10.1088/1755-1315/287/1/012040.

S. R. Kumar, V. N. Nathan, S. I. M. Ashique, V. Rajkumar, and P. A. Karthick, “Productivity enhancement and cycle time reduction in toyota production system through jishuken activity - Case study,†Mater. Today Proc., vol. 37, no. Part 2, pp. 964–966, 2020, doi: 10.1016/j.matpr.2020.06.181.

Downloads

Published

30-11-2023

Issue

Section

Articles